Impact-Rated Skylights in Florida: Code, Approvals, Roof Fit

Hi, I’m glad you’re here! 💬 Short answer: in Florida’s wind-borne debris region, a skylight has to pass impact testing or be covered by an approved protection device. Outside that region it usually doesn’t. Either way, a skylight is a hole in your roof, so the flashing, the curb and the roof around it decide whether it survives a Tampa Bay hurricane. Here is how to sort out which rules apply to your home and how to check a product before it goes on your roof.
TL;DR
- 📋 Florida code requires skylights in the wind-borne debris region to be impact-resistant or protected. Many inland homes are outside that region.
- 🔍 “Hurricane” or “impact” claims must be backed by a Florida Product Approval or a Miami-Dade Notice of Acceptance (NOA). You can look the number up yourself.
- 🏠 A rated skylight fails if the curb, flashing or roof deck around it is weak. Plan the skylight and the roof together.
- 💰 Opening protection can earn wind mitigation credits, and My Safe Florida Home grants can cover windows and skylights.
Table of Contents
- What “impact-rated” means for a skylight
- Does your home need one?
- How to verify a skylight’s approval
- The roof around the skylight decides the result
- Costs, credits and grants
- A quick decision guide
- Our perspective
- Get the roof ready first
- FAQ
- Sources
What “impact-rated” means for a skylight
An impact-rated skylight has passed a test that simulates wind-borne debris. Under the Florida Building Code, the building envelope (walls, roof, doors, skylights, glazing) must either meet the impact test criteria or be protected by an external device that does, as summarized from the code’s Section 1626. In the large-missile test, a 9-pound 2-by-4 hits the product at 50 feet per second. Essential facilities such as hospitals are tested at 80 feet per second.
The test is not the same thing as a wind-pressure rating. Impact resistance asks whether debris breaks through. Design pressure asks how much wind load the unit can take pushing in or pulling out. A skylight can have one without the other. The state’s window fact sheet also notes that the whole assembly is tested: glass, frame, attachment hardware and installation method, not just the glazing. That matters for skylights too. The way a unit is fastened is part of what was tested.
Does your home need one?
Not every Florida skylight must be impact-rated. It depends on where the house sits.
The code defines the wind-borne debris region as areas within one mile of the mean high-water line where an Exposure D condition exists upwind and the ultimate design wind speed is 130 mph or more, or anywhere the design wind speed is 140 mph or more, as described for the 2023 Eighth Edition. The maps differ by risk category. The Eighth Edition took effect on December 31, 2023.
For Tampa Bay, that means many waterfront and bayfront homes in Pinellas, Hillsborough and Manatee counties are likely in the region, while many inland Central Florida homes are not. A property’s location can fall either way, so ask your local building department which wind map applies to your address.
Two details are worth knowing:
- The 2023 edition dropped the word “coastal” from the definition, and lake-adjacent areas may be pulled in. Don’t assume an inland address is exempt without checking.
- Reroofing in the region can trigger upgrades, including roof-to-wall connections and impact-resistant skylights. If you are replacing your roof, the skylights are part of that conversation.
The High-Velocity Hurricane Zone (HVHZ) is stricter still. It covers Miami-Dade and Broward counties, so it does not apply to Tampa Bay. You will still see its Miami-Dade approvals on many products, and they are a useful quality signal.
How to verify a skylight’s approval
Florida law is firm on marketing. A product cannot be advertised or sold as hurricane, windstorm or impact protection against wind-borne debris unless it is approved under Florida Statute 553.842 or s. 553.8425. Skylights are among the product categories that statute covers. Violators are subject to the state’s deceptive and unfair trade practices law.
So a brochure saying “hurricane skylight” is not enough. Here is the routine:
- Get the approval number. Ask for the Florida Product Approval number, or the Miami-Dade NOA number, for the exact model and size.
- Look it up. On the Florida Product Approval site, choose “Product Approval,” then “Find a Product or Application,” and search by manufacturer or category. The product page links to the installation instructions, as explained in a Florida builders’ course.
- Match the limits. Read the stated design pressure and where the product may be used: inside the HVHZ, outside it, or both. Some listings state impact resistance and others do not.
- Match the installation. The approval comes with installation requirements, such as curb type, fastener spacing and flashing. Those must be followed on your roof.
- Keep the paperwork for the inspector. One Florida building department’s sheet says the approval number, tested performance and installation requirements must be available on the jobsite, and a product may have to be removed if approval can’t be shown.
What a Miami-Dade approval tells you
Miami-Dade’s skylight checklist is one of the toughest in the country. It calls for current lab tests, including impact, air and water resistance, cyclic loading and, for operable units, forced entry. A sample NOA shows an impact self-flashing glass skylight approved for large and small missile impact, with a stated design pressure and a five-year approval window. Reading one tells you how a real listing looks: model, glazing type, design pressure, anchorage, expiry date. Compare any quote against that level of detail.

The roof around the skylight decides the result
A certified skylight can still leak or tear out if what holds it is weak. This is where most hurricane-season skylight trouble starts, and it is a roofing problem more than a glass problem.
The curb. Curb-mounted units sit on a raised frame. If the curb is poorly built or loosely attached, the whole unit is only as strong as that connection.
The flashing. The metal and membrane that shed water around the opening are the usual leak point. Old sealant that has cracked in Florida sun is a common culprit. Leak and flashing repair on our roof repair page is listed at $350-$900.
The deck. Wind pulls up on the opening as much as it pushes in. If the deck under the curb is not well attached, the rating means little. We explain what inspectors look at in our guide to roof deck attachment in Florida.
The roofing material. Shingle, tile and metal roofs each tie into a skylight differently. Tile, for example, needs careful flashing and good installation more than anything, which we cover in how tile roofs perform in hurricanes.

Replacing a skylight after storm damage
If debris cracked a skylight or water is coming in, start with the roof. Cover or tarp the opening, photograph the damage, and have the roof inspected before anyone swaps the unit. A skylight replacement is a roof penetration, so it needs a building permit, and the replacement must carry a product approval that fits your location. Ask your building department what it wants submitted. If the damage came from a named storm, tell your insurer early and keep the photos and any approval paperwork. Our team can help with insurance claims on the roof side, and our storm damage roof repair page explains what that looks like.
Costs, credits and grants
We don’t publish skylight prices, because they swing with size, glazing, curb type and roof material. What we can say is where the money can come back.
Insurance credits. Florida insurers give discounts for wind-resistant features, and opening protection is one of the items on the wind mitigation form. The size of the credit varies by insurer and by the inspection documentation. If one unprotected skylight is the only gap in your opening protection, closing it may change your form. Our wind mitigation checklist shows what the inspector looks at, and our guide to roof insurance discounts explains what qualifies.
My Safe Florida Home. The state grant program’s eligible improvements were revised to specify that windows and skylights count under opening protection. The same analysis notes that 2023 legislation raised the eligible insured home value to $700,000 or less and dropped the requirement that a home be in the wind-borne debris region. We perform My Safe Florida Home inspections, so you can start there. Check the program’s official page for current funding and application windows, since they change.
Timing with a new roof. If a reroof is coming, doing the skylight work at the same time avoids tearing up fresh flashing later. Our roof replacement cost guide lists replacements at $9,000-$30,000, depending on the home and material.
A quick decision guide
| Your situation | What to do |
|---|---|
| Home in the wind-borne debris region, replacing the roof | Plan for an impact-rated, approved skylight or an approved protection device |
| Home inland, skylight is old and leaking | Fix the flashing first, then choose a replacement with a valid Florida Product Approval |
| Skylight broken in a storm | Tarp, photograph, inspect the roof, then permit and replace with an approved product |
| Hoping for insurance credits | Get a wind mitigation inspection after the work so the form reflects it |
Our perspective
We look at skylights as part of the roof, not as a separate product. When a homeowner calls about a leak around one, the question we start with is what the opening is attached to and how it is flashed. Glass that passes a missile test does its job only when the curb, the flashing and the deck beneath it are sound.
That is why we pair this topic with a proper roof inspection. As a GAF Master Elite® contractor, a status held by fewer than 2% of roofing contractors in North America, we are held to installation standards that cover flashing and penetrations like these. We are licensed (Florida Contractor License #CCC1332551), insured, and we stand behind our work with manufacturer-backed warranties.
If you are planning a reroof, tell us about the skylights early. We can inspect the roof, document the opening protection for wind mitigation, and sort out what the roof needs before the new system goes on.
Anthony
Get the roof ready first
Not sure whether your skylight is a weak spot? 🚨 We can inspect the roof around it, check flashing and deck condition, and give you an itemized estimate for any repair or reroof. Start with our roof inspection and residential roofing page, or if you are dealing with storm damage, see our roof repair services, where repairs are listed from $463 to $1,589.
Our team works across Tampa Bay and Central Florida, and we can also help with wind mitigation inspections once the work is done.
FAQ
Is every Florida skylight required to be impact-rated?
No. The requirement applies in the wind-borne debris region, which is defined by distance from the coast and by design wind speed. Many inland homes fall outside it. Confirm your address with your local building department, since the definition has changed with recent code editions.
What is the difference between impact-rated and a design pressure rating?
Impact resistance shows a unit survived a debris strike in testing. Design pressure shows how much wind load it can take in and out. A product approval lists the performance it was tested for, so read both on the listing before you buy.
Do I need a permit to replace a skylight?
Yes, in general. Replacing a skylight changes a roof penetration and the new unit needs an approved product. Your local building department will tell you what it requires. The inspector may ask to see the approval number and installation requirements on site.
Can an impact-rated skylight lower my insurance premium?
It can help. Florida insurers give credits for wind-resistant features, and opening protection is on the wind mitigation form. The amount depends on your insurer and on your inspection documentation.
Sources
- High-Velocity Hurricane Zones: Impact Tests for Wind-Borne Debris (UpCodes)
- Florida Building Code window systems fact sheet
- New 2023 FBC Eighth Edition is Now in Effect
- Where is the Windborne Debris Region?
- Florida Statutes 553.842
- Building and Retrofitting in Florida 2
- Miami-Dade skylight approval checklist #0275
- Miami-Dade NOA 25071801
- Florida Senate bill analysis, SB 7028 (2024)
